How to Purchase Right Nonwoven Machines

When you decide to invest in the nonwoven industry, you must consider purchasing nonwoven machines. However, you may be unsure of which types of machines to purchase. Take diapers as an example to gain a better understanding.

The top sheet, surge layer, absorbent core, leak guard, and back sheet are the main components of the diaper. Except for the absorbent core, all of the parts are made of nonwoven fabric.

Because it will be in direct contact with the child’s skin, the top sheet should be thin and soft. It asks for a hydrophilic treatment and stays dry. As a result, SSS nonwoven machine and hydrophilic nonwoven machine are excellent options.

The surge layer is slightly thicker. It is placed beneath the top sheet and above the absorbent core. Its function is to accept liquid from the top sheet. The urine should then be distributed as widely as possible to all sections of the absorbent core below. A hydrophilic treatment is required for the surge layer. As a result, as with the top sheet, I recommend both SSS nonwoven machines and hydrophilic nonwoven machines.

When the baby flips, the leak guard prevents side leakage. The SMS fabric has a unique and excellent water resistance property. It is critical to purchase an SMS nonwoven machine.

Finally, you must buy one SSS nonwoven machine, one SMS nonwoven machine, and one hydrophilic nonwoven machine. It’s a significant burden if you’re just starting out.

We have put together a budget for you. Simply purchase one SSMS and one hydrophilic nonwoven machine. It can perform the functions of SMS and SSS machines at a lower cost. What are your thoughts?

For the past 10 years, we have concentrated on developing nonwoven production lines. We strive to provide customers with high-quality equipment, affordable plans, and excellent after-sales service. Please do not hesitate to contact me if you have any questions about our machines.

Why Melt Blown Air Heaters Are Used in Meltblown Machine?

Meltblown machine cloth heater is a kind of electric heating device which uses to heat gas in a cylindrical heat preservation container. The non-woven cloth heater has the characteristics of fast heating speed, good heat preservation performance and high heating temperature.

The heater is composed of body and control system. The heating parts are made of stainless steel tube as protective casing. High temperature electric resistance alloy wire crystallized magnesium oxide powder by compression process. In the control part, the advanced digital integrated circuit trigger and high reverse voltage thyristor use to make adjustable temperature measurement. And constant temperature system, which ensures the normal operation of the electric heater.

Melt Blown Cloth Heater Technical Features:

  1. It can obtain higher working temperature under lower operating pressure.
  2. The thermal efficiency of melt-blown cloth heater is high, up to 95%, and the temperature control accuracy can reach ± 1 °C.
  3. The equipment size is small, the installation is more flexible. And it should installe near the heating equipment and the power is large.
  4. Fast thermal response, high temperature control accuracy, high comprehensive thermal efficiency.
  5. The melt-blown cloth heater has a wide application range and strong adaptability. It can apply to explosion-proof or ordinary occasions. Its explosion-proof grade can reach B and C grades, and its pressure can be 20Mpa. And according to the needs of users using vertical or horizontal cylinder installation.
  6. High heating temperature: The maximum operating temperature of the design can reach 650 ° C, which is not available in general heat exchangers.
  7. The melt-blown cloth heater has long service life and high reliability. It has composition of special electric heating material, and the design power load is conservative.

Why Melt Blown Air Heaters Uses in Meltblown Cloth Equipment?

Since the airflow pressure of the melt-blown airflow drafting system is higher, it requires a fan with higher output pressure. Roots fans, spiral fans, screw compressors are the more commonly used draft fans.

Which Meltblown Air Heater Performance to Choose?

The air gap of melt-blown components is small and the system resistance is large. In order to maintain a certain flow rate, it is necessary to choose the air compressor with high energy consumption and high pressure as the draft airflow pressure source. You would use a ducted air heater.

Guanlong Meltblown Machine Non Woven Fabric

What is the operating principle of a melt blown air heater?

In meltblown systems, most air heaters are electrically heated. Inside the heater housing made of stainless steel. The tubular electric heating element equips with a large number of stainless steel material. When it energize, the tube will heat up and exchange heat with the airflow sent by the fan. And the heat will transfer to the airflow, which becomes the high temperature draft airflow needed by the process.

What is the attention point of the melt-blown air heater?

  1. The heater control part is a precision instrument. Be careful when transporting. It strictly forbids to impact or hit.
  2. The cylinder part should hoist reasonably to avoid deformation and damage the internal heating element.
  3. The heater and control cabinet place in the library, and it strictly forbids to rain.

Technical Debugging of Meltblown Machine

The quality of meltblown cloth is more and more demanding. Here are some technical points of the meltblown machine in the production process of melt blowing cloth:

  1. Production equipment

As long as the following standards achieves to produce high-quality melt-blown cloth is not a problem. Its production equipment composition is not much to say that you all know. The extruder will melt the material. You have enough pressure to squeeze it out. The metering pump supplies mold melt continuously and stably. Uniform wire tapping and hot air. The heating tank can stabilize the heating air. The air supply equipment can have sufficient air volume and pressure. In fact, this is enough, many people say that the pressure should be more than 0.4 or even 0.6, in fact, no, the air volume is enough to be able to produce filaments. Electrostatic electret can hit above 60KV.

  1. Raw material

We use the basic material melt refers to the basic 1500, not less than 1200 on the line. Set the appropriate temperature according to the level of the melt. Electret masterbatch can have a continuous ability to lock electricity, there is no need to pursue organic inorganic.

  1. Adjusting machine

Equipment materials are no problem, to have a good technician to set the appropriate parameters of high-quality cloth out. The same equipment can use to set a variety of parameters to make the same quality of cloth, here will be a half time to say, you can send me a private letter according to their own situation.

  1. Frequently Asked Questions

Cloth hard or brittle toughness poor solution. Low temperature hardness increases air flow and air temperature and mold temperature to make the wire thin and soft. High temperature appropriate increase the receiving distance, increase the net transfer suction.

  1. Crystal point

The temperature is the main reason to cause the crystal point. The melt temperature is too high (viscosity is too thin) or too low (viscosity is too large). And observing the change of the mold temperature or the wind temperature adjust the crystal point. The second material is wet, open the dryer 75 ~ 90 degrees baking material on the line. Third, the hot air has large water content, and the water and gas separat before the air enters the heating tank.

  1. Filtration rate

The filter rate of the cloth itself, the filamentary filter effect is naturally improved. The second electrostatic electret and masterbatch with enough particle adsorption, the simplest test method cloth roll open about 20 cm can be their own absorption fit on the line.

In fact, it is not difficult to make high-quality cloth, as long as the equipment and materials are no problem. Other debugging on the two points of temperature and air volume with a good line.

Guanlong Meltblown Machine

The difference between medical non-woven fabrics and ordinary non-woven fabrics

At present, the common types of non-woven fabrics on the market can be mainly divided into two types, one is ordinary non-woven fabrics, and the other is medical non-woven fabrics. Because they are mainly used in medical treatment, they have strict quality requirements. Besides, what are the differences between the two?

  1. Antibacterial ability

Since it is a medical non-woven fabric, the first criterion is the antibacterial ability. Generally, the smmms three-layer melt-blown layer structure is used. The ordinary medical non-woven fabric uses a single-layer melt-blown layer structure. Compared with the two, it must be a three-layer structure. Antibacterial ability is stronger. As for non-medical ordinary non-woven fabrics, because there is no meltblown layer, it does not have antibacterial ability.

  1. Suitable for a variety of sterilization methods

Since it has antibacterial ability, it also needs corresponding sterilization ability. High-quality medical non-woven fabrics can be applied to a variety of sterilization methods. There are three common sterilization methods: pressure steam, ethylene oxide, and hydrogen peroxide. However, ordinary non-medical non-woven fabrics cannot be applied to various sterilization methods.

  1. Quality control

Medical non-woven fabrics all need to pass the certification of the relevant product quality control system, and there are strict standards and requirements for each step of the product in the production process.

The main difference between medical non-woven fabric and ordinary non-woven fabric is mainly reflected in these aspects.

Our company is a professional manufacturer of non-woven fabrics, producing various types of non-woven products. We can produce non-woven fabrics of various widths and colors according to customer requirements. They are widely used and have many specifications. Special treatment such as hydrophilic, anti-aging, anti-static and anti-ultraviolet.

Production process and advantages of non-woven geotextiles

The non-woven fabric has no warp and weft threads, so it is very convenient to cut and sew, and it is light and easy to shape.
Because it is a fabric that does not require spinning or weaving, it just orients or randomly arranges textile staple fibers or filaments to form a web structure, and then uses mechanical, thermal bonding or chemical methods to reinforce it.
It is not interwoven and braided by yarns one by one, but the fibers are directly bonded together by physical methods, so when you get the sticky scale in your clothes, you will find that, You can’t get a single thread out. Nonwovens break through the traditional textile principles, and have the characteristics of short process flow, fast production rate, high output, low cost, wide application, and many sources of raw materials.

The relationship between non-woven fabrics and spunbond fabrics

Spunbond and non-woven fabrics are subordinate. There are many production processes for the manufacture of non-woven fabrics, of which spunbond is one of the non-woven production processes.
(Including spunbond, meltblown, hot rolling, spunlace, most of the non-woven fabrics on the market are produced by spunbond)
According to the composition of non-woven fabrics, there are polyester, polypropylene, nylon, spandex, acrylic, etc.; different components will have completely different styles of non-woven fabrics. The spunbond fabric usually refers to polyester spunbond and polypropylene spunbond; and the styles of these two kinds of fabrics are very similar, and can only be judged by high temperature test.
Non-woven fabric is a kind of non-woven fabric, which directly uses polymer chips, short fibers or filaments to form fibers through air flow or machinery, and then undergoes hydroentanglement, needle punching, or hot rolling reinforcement, and finally after finishing Formed non-woven fabric. A new type of fiber product with a soft, breathable and flat structure, the advantage is that it does not produce lint, it is strong, durable, and silky soft, and it is also a kind of reinforcing material, and it also has a cotton feel. Compared with cotton fabrics, non-woven Cloth bags are easy to form and inexpensive to manufacture.

  1. Light weight: Polypropylene resin is used as the main raw material, with a specific gravity of only 0.9, only three-fifths of cotton, with fluffy and good hand feeling.
  2. Soft: It is composed of fine fibers (2-3D) and is formed by light point-like hot melt bonding. The finished product is moderately soft and comfortable.
  3. Water repellency and breathability: Polypropylene chips do not absorb water, have zero moisture content, and the finished product has good water repellency. It is composed of 100% fiber, which is porous and has good air permeability. It is easy to keep the cloth surface dry and easy to wash.
  4. Non-toxic and non-irritating: The product is produced with FDA-compliant food-grade raw materials, does not contain other chemical ingredients, has stable performance, is non-toxic, has no peculiar smell, and does not irritate the skin.
  5. Antibacterial and anti-chemical agents: Polypropylene is a chemically passive substance, not moth-eaten, and can isolate the erosion of bacteria and insects in the liquid; antibacterial, alkali corrosion, and finished products do not affect the strength due to erosion.
  6. Antibacterial. The product is water-repellent, not moldy, and can isolate the erosion of bacteria and insects in the liquid, and is not moldy.
  7. Good physical properties. It is made of polypropylene spun directly into a mesh and thermally bonded. The strength of the product is better than that of ordinary staple fiber products. The strength is non-directional, and the vertical and horizontal strengths are similar.
  8. In terms of environmental protection, the raw material of most of the non-woven fabrics used is polypropylene, while the raw material of plastic bags is polyethylene. Although the two substances have similar names, they are very different in chemical structure. The chemical molecular structure of polyethylene is quite stable and extremely difficult to degrade, so it takes 300 years for plastic bags to be decomposed; while the chemical structure of polypropylene is not strong, the molecular chain can be easily broken, so it can be effectively degraded , and enter the next environmental cycle in a non-toxic form, a non-woven shopping bag can be completely decomposed within 90 days. Moreover, non-woven shopping bags can be reused more than 10 times, and the pollution to the environment after disposal is only 10% of that of plastic bags.

Advantages and disadvantages of non-woven fabrics

Advantages of non-woven fabrics:

Non-woven fabrics are non-woven fabrics, also known as non-woven fabrics. A sheet, web or batt made of oriented or randomly arranged pure natural cotton and linen fibers bonded to each other by friction, cohesion or bonding or a combination of these methods. The non-woven material has a unique hollow structure, which is convenient for ventilation, formaldehyde-free, waterproof and moisture-proof, and can effectively adjust the indoor air humidity. It is rich, recyclable, and feels friendly and natural. Its filaments have strong weaving tension. When the whole non-woven paper is completely burned, only carbon dioxide and water will be produced, and no toxic gas will be produced. It is a new type of environmentally friendly wallpaper that can be safely attached to various rooms in the home.

Disadvantages of non-woven fabrics:

Because non-woven wallpaper is made of pure natural plant fibers, the lack of other chemical additives means that its form and color options are very narrow, and there are not as many colors as ordinary wall varieties. There is also a big gap in price between non-woven wallpaper and ordinary wallpaper. It is made of pure natural plant fibers. The whole production process is very complicated, so the cost is relatively high, and the price is higher than ordinary wallpaper. expensive.

Application of auxiliaries in non-woven fabrics:

improve the dispersion of filler masterbatch and pigment masterbatch, and obtain good mechanical properties and brightly colored threads; reduce the breakage of non-woven fabrics and the decline of fiber strength; reduce the surface of the thread. The friction coefficient prevents the wire from sticking and surface static electricity; it improves the processing fluidity, and the wire drawing production is stable; the surface of the wire is silky, delicate and bright.

Non Woven Manufacturing Machine Introduce

Basic process flow of non woven manufacturing machine is as flow:

  • Automatic non-woven manufacturing machine basic process flow:
  • Feeding (non-woven coil)
  • Fold
  • Ultrasonic bonding
  • Tailoring
  • Bag making (outlet)
  • Waste recycling
  • count
  • Stacking

The process can has fully automated time only need 1 ~ 2 people to operate. It’s in a certain range of production speed and product size using touch screen operation. Equipped with stepper fixed length, photoelectric tracking, automatic counting. Automatic drilling and other industrial control devices, colleagues in order to further achieve the effect of energy saving. And environmental protection in the production process with the residual material recovery function. The production of bag-making leftover waste automatically collected, help secondary use to reduce labor intensity and increase the efficiency of work.

Guanlong Manufacture Non Woven Fabric Making Machine

Features of Automatic Non-woven Manufacturing Machine

Advanced design technology, production speed, high efficiency, can process different specifications, different shapes of environmentally friendly non-woven bags, with good quality bonding strength and other characteristics.

  1. Non-woven bag edge: pressing the edge of non-woven bag;
  2. Non-woven bag embossing: non-woven bag upper and edge of the pattern pressure;
  3. Non – woven arm belt pressing: through the sleeve automatically pressing arm bag.

Equipment advantages

  1. The use of ultrasonic welding saves the trouble of changing the needle and thread frequently, and the textile can be neatly cut and sealed locally without the traditional suture broken joint. Stitching colleagues also played the role of decoration. Bonding strength can achieve the effect of waterproof embossing clear, the surface is more three-dimensional relief effect, the work speed is fast, the product effect is better and more high-grade appearance.
  2. The use of ultrasonic and special steel wheel processing, sealing edge does not crack does not hurt the edge of the cloth, and there is no rough edge, crimping phenomenon.
  3. No preheating is required during manufacturing and can be operated continuously.
  4. The operation is simple, and the traditional sewing machine operation method is not much different, fully automatic equipment only need to understand the simple operation of knowledge can be directly started.
  5. Low cost 5 to 6 times faster than traditional machines and high efficiency.

Spunbond Machine

Spunbond Machine, the main material is polyester and polypropylene, with high strength and high temperature resistance


Spunbond Machine: After extruding and stretching the polymer to form continuous filaments, the filaments are laid into a web, and the web is then subjected to self-bonding, thermal bonding, chemical bonding or mechanical reinforcement methods to make the fiber web. into a non-woven fabric.


Good high temperature resistance, good low temperature resistance (polypropylene can be used for a long time at 150°C, polyester can be used for a long time at 260°C), aging resistance, UV resistance, high elongation, good stability and air permeability, corrosion resistance , sound insulation, moth-proof, non-toxic.

The main purpose

The main materials of Spunbond Machines are polyester and polypropylene.
The main products of Spunbond Machines are polypropylene and polyester (long fiber, staple fiber) non-woven fabrics. The most common and commonly used applications are non-woven bags, non-woven packaging, etc.; for Spunbond Machines It is easier to identify, generally has good two-way fastness, and the rolling point of general Spunbond Machines is diamond-shaped.
At the application level, it can also be used as flower packaging cloth, luggage cloth, etc. The characteristics of wear resistance, firm hand feeling, etc. make it the best choice for making such products.

Process flow

Polypropylene: polymer (polypropylene + return material) – large screw high temperature melt extrusion – filter – metering pump (quantitative conveying) – spinning (spinning inlet and outlet stretching and suction) – cooling – Air Traction – Net curtain forming – Upper and lower pressing rollers (pre-reinforcement) – Mill hot rolling (reinforcement) – Winding – Reverse distribution and slitting – Weighing and packaging – Finished product storage
Polyester: processed polyester chips – large screw high temperature melt extrusion – filter – metering pump (quantitative conveying) – spinning (spinning inlet up and down stretching and suction) – cooling – air traction —— Net curtain forming —— Upper and lower pressing rollers (pre-reinforcement) —— Hot rolling of rolling mills (reinforcement) —— Winding —— Reverse distribution and slitting —— Weighing and packaging —— Finished product storage

Type of technology

The world’s spunbond non-woven technology mainly includes Lacoffel technology from Reifen, Germany, STP technology from Italy, and Kobe Steel technology from Japan. The current situation, especially with Reffin technology becoming the mainstream technology in the world. Has developed to the fourth generation of technology. It is characterized by the use of negative pressure ultra-high-speed air drafting, and the fiber can be stretched to about 1 denier. Many domestic enterprises have already made imitations. Since there are many cutting-edge problems in its core technology that have not been solved or mastered, it will take time for domestic equipment manufacturers to reach the technical level of Refine.

Meltblown cloth production line application range

Melt blown Machine (Melt blown Machine) is a product made of high melt index PP (polypropylene) as raw material and composite non-woven fabric. It is the core material of the mask. The diameter of the spinning fiber can reach 0.001-0.005 mm. It has many voids, fluffy structure, good wrinkle resistance, and has a unique capillary structure. The ultra-fine fibers increase the number and surface area of ​​fibers per unit area, so that the meltblown cloth has good filterability, shielding, heat insulation and oil absorption. . Its main uses include air filtration, acid breaking liquid filtration, food hygiene filtration, industrial dust mask production, etc. In addition, it can also be used as medical and sanitary products, industrial precision wipes, thermal insulation materials, oil absorbing materials, battery separators, imitation leather base cloth and many more

Air purification field

Used for air purification filter element and air filtration, it has the advantages of low resistance, high strength, long service life and low price.

Medical field

Medical masks, dust masks, protective clothing, and SMS products compounded with spunbond fabrics to make surgical gowns and other medical supplies

Medical masks generally adopt a multi-layer structure, referred to as SMS structure: a single-layer spunbond layer (S) on both sides, a single-layer or multi-layer meltblown layer (M) in the middle, and the meltblown layer brings virus filtering to the mask. The main material is the Melt blown Machine in the middle, referred to as melt-blown cloth. Meltblown cloth is the core material of the mask. The meltblown cloth mainly uses polypropylene as the main raw material. It is melted and filtered by a screw extruder and extruded from the spinneret hole of the nozzle, and is subjected to high-speed hot air at the exit of the spinneret hole. The flow is sprayed to obtain ultra-fine short fibers that are stretched and formed, and the fiber diameter can reach 1 to 5 microns. It has many voids, fluffy structure and good wrinkle resistance. The ultra-fine fibers with unique capillary structure increase the number and surface area of ​​fibers per unit area, so that the meltblown cloth has good filterability, shielding, heat insulation and oil absorption. It can be used in air, liquid filter materials, isolation materials, absorbing materials, mask materials, thermal insulation materials, oil absorbing materials and wiping cloths and other fields.

Filter material

With excellent filtration performance and good diaphragm material, it has been widely used in the field of filtering acid and alkaline liquids and oils

Industrial wipes

Relying on the adsorption of fine fibers as an oil-absorbing material, it is used in environmental protection projects, oil-water separation projects, and cleaning of oil and dust.

Thermal material

Meltblown fibers have large surface area and high porosity to prevent heat loss and are widely used in clothing and thermal insulation materials.

Health field

Suitable for diapers, incontinence pads, women’s sanitary napkins, wipes, shoe covers and other cleaning needs material applications

Decorative cloth

Household items: spring cloth, bedding, seat supplies, etc.

Industrial cloth

The field of mud bag automobile, bagging, geotextile wrapping cloth, agricultural protection cloth, seedling raising cloth, irrigation cloth, thermal insulation curtain, etc.

Packaging Supplies

Shopping bags, rice bags, tea bags, clothing packaging, etc.

Equipment Characteristics Of Spunbond Non-woven Equipment

Spunbond non-woven fabric is a relatively popular fabric now. Spunbond non-woven fabric has many advantages. Therefore, it has been widely welcomed at all ages. So, how to manufacture large-scale spunbond non-woven fabrics? Naturally, it is necessary to rely on an automated equipment called spunbond non-woven fabric equipment to achieve mass production. The performance requirements of spunbond non-woven equipment are also relatively high. Our manufacturer has done a lot of improvement and research and development work, so that spunbond non-woven equipment has the following excellent equipment characteristics. Let’s take a look.
Equipment characteristics of spunbond non-woven machinery

  1. The spunbond non-woven equipment is built with excellent assembly and welding technology as a whole. It has a strong structure, high strength, durable performance, stable operation, and can maintain a good working condition for a long time in a high-load processing environment.
  2. The automatic operation design is simple and convenient, and there is no burden for the operator. The use of spunbond non-woven machinery can save a lot of labor costs and achieve higher benefits for enterprises.
  3. With stable and reliable processing quality, the overall non-woven products show uniformity, which can maintain a high degree of quality uniformity, reduce the defective rate, greatly improve the market competitiveness of anti-stick non-woven products, and bring continuous continuous improvement to the enterprise. income.
    As a popular high-quality fabric, spunbond non-woven fabrics naturally need to pay attention to the quality of the process during the production process. Choosing a high-quality processing equipment can significantly improve the quality of spunbond non-woven fabrics. For this, very good quality control can be achieved with our spunbond nonwoven machines.